Use and Care Manual

8
www.ninjakitchen.com
1 Place the motor base on a clean, dry, level surface such
as a counter or table top.
2 Add ingredients to the Nutri Ninja
®
cup.
3 Place the single serve blade onto the cup and screw it
tightly until you have a good seal. (Fig. 1)
4 Turn the Nutri Ninja
®
cup upside down and place it
onto the motor base, aligning the tabs on the cup with
the motor base. Turn the Nutri Ninja
®
cup clockwise to
lock into place. You will hear a click when the lock is
engaged. (Fig. 2) Turn the power button on, the single
serve button will illuminate.
5 Press down on the Single Serve button in short
intervals to activate. (Fig. 3)
6 Once you have reached your desired consistency,
turn the power button off. Turn the Nutri Ninja
®
cup
counter clockwise and pull straight up to remove.
(Fig. 4, Fig. 5)
Fig. 2
Assembly and Use for the Nutri Ninja
®
Cup
Fig. 3 Fig. 4 Fig. 5
ASSEMBLY USE REMOVAL
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the “Max” fill line.
7 Turn the cup upright and remove the single serve blade
by twisting the blade assembly counter clockwise.
8 Place the To-Go drinking lid onto the Nutri Ninja
®
cup,
twist to seal and enjoy!
9 Make sure that the motor base is unplugged when not
in use.
10 To release the motor base from
the counter or table top, place your
hands underneath both sides of the
motor base and gently pull the unit
up and towards you. (Fig. 6)
NOTE: To order additional Nutri
Ninja
®
Cups, please visit our website:
www.ninjakitchen.com or feel free to contact
customer service: 1-877-646-5288.
Fig. 1
For best results, use short “PULSES”... Practice makes perfect!!
Fig. 6
WARNING: Never leave the appliance unattended while in use.
CAUTION: Handle the blade assemblies with care, as the blades are very sharp.
CAUTION: DO NOT BLEND HOT FOODS OR HOT LIQUIDS.
IMPORTANT: Make sure that the motor base is plugged in for use