User Manual

14 15ninjakitchen.com
BREWING
CUSTOM BREWS
CLASSIC BREW & RICH BREW
1 After filling the water reservoir, place
either the COFFEE or TEA filter holder
into the brew basket. Add the ground
coee, loose leaf tea, or tea bags to
the filter.
2 Close the brew basket, ensuring it is
securely in place. The control panel will
display either COFFEE (Fig. 15a) or TEA
(Fig. 15b) settings based on the filter
holder that has been inserted.
3 Use the Multi-Serve dial to select
the brew size. Place the empty vessel
you would like to brew into under the
brew basket.
4 Turn the START/SELECT dial to choose
either Classic Brew or Rich Brew (Fig. 16a,
Fig. 16b). If brewing tea, press the Tea
button
to toggle to the tea menu, and
use the dial to choose your tea type. To
change your brew style while in the tea
menu, press the Tea button again.
5 Press the START/SELECT dial to start the
brew. A progress bar on the control panel
will show the status of the brewing cycle.
To cancel the brew at any time, press the
dial again or press the Power button.
6 The unit will beep and the clock will
display End when the brew is complete.
NOTE: Some brews have a pre-infusion
cycle with varying times. The brewing
cycle will begin, then there will be
a pause for a short period before
resuming. This process is used to evenly
saturate the coee grounds or tea.
NOTE: If making a single cup, lower the
Single-Serve Cup Platform and set your
vessel in the center of it. Please ensure
you are using at least a 12 oz. cup for
the Cup size, 14 oz. cup for the XL Cup
size, 16 oz. travel mug for the Travel Mug
size, and 20 oz. travel mug for the
XL Multi-Serve size.
NOTE: Rich Brew will use slightly less
water and yield slightly less brewed
coee or tea than Classic Brew.
NOTE: If the brew basket is closed with
no filter holder in place, both COFFEE
and TEA will flash.
Fig. 16bFig. 16aFig. 15b
Fig. 15a
CP307 P4 BACKLIT UI LAYOUT
2017.12.21
PREPARING & USING
THE NINJA HOT & COLD BREW SYSTEM™ – CONT.
INTELLIGENT WARMING PLATE
The Intelligent Warming Plate will
automatically turn on during a Half or
Full Carafe size of Classic or Rich Brew.
The Intelligent Warming Plate will adjust
the heat it produces to avoid burning the
coee over time.
IMPORTANT: The HOT SURFACE
light will illuminate when the warming
plate is hot.
STAY WARM BUTTON
Press STAY WARM after the brew to turn
the Intelligent Warming Plate o. You can
turn the Intelligent Warming Plate back on
by pressing STAY WARM again (Fig.14).
TIME & TEMPERATURE ADJUSTMENT
You can adjust how long the Intelligent
Warming Plate remains on (up to 4 hours)
and/or set the temperature to High or Low.
By default, the Intelligent Warming Plate is
set to remain on for 2 hours, and is set to
High to keep your coee and tea hot. The
Low setting keeps your brew at a slightly
lower temperature to preserve flavor longer.
To change the time/temperature settings of
your warming plate, follow these instructions:
1 Press and hold STAY WARM until
the clock begins to flash the current
warming time.
2 Quickly press the hour (H) and/or
minute (M) buttons to increase the
time up to 4 hours or decrease the
time to 0 hours. Press STAY WARM to
set the new time. Or wait 5 seconds,
and the unit will beep, signifying the
new time has been set.
3 Next, the clock will display the current
warming plate temperature. To keep the
same temperature, press STAY WARM, or
wait 5 seconds for the same temperature
to lock in. To change the temperature,
press the hour (H) or (M) buttons, then
press STAY WARM, or wait 5 seconds for
the temperature to lock in.
NOTE: The setting you choose will
apply to both Coee and Tea.
NOTE: If you set the warming time
to 0 hours, it will skip the warming
temperature menu.
Fig. 14
1-877-646-5288