Quick Start Guide

ManualsBrandsNinja ManualsBlendersNinja Chef High Speed Blender

PITCHER PITCHER LID LID CAP TAMPER

PARTS

Lower pitcher onto

motor base, then

rotate clockwise until

it clicks into place.

TAMPER

If unmixed ingredients are sticking

to the pitcher, remove lid cap and

use tamper to push ingredients

closer to the blades.

BLENDING

Press the power button.

The base defaults to

Auto-iQ® Mode. Select the

desired program and press

START/STOP, or press

MANUAL to switch modes

and use the dial to select

blending speed.

HIGH-SPEED BLENDER

QUICK ASSEMBLY

PITCHER

SEE REVERSE SIDE TO LEARN MORE ABOUT AUTO-IQ AND MANUAL MODES.

Add ingredients to pitcher,

making sure not to exceed

Max Fill line. Hot ingredients

cannot exceed the Max Hot

Liquid line.

Insert lid cap

into lid and

turn clockwise

to lock.

AS SE MBLY

IN USE

WARNING: Pitcher’s bottom blades are sharp. Contact with the blades can result in laceration.

Please make sure to read the enclosed Ninja

Owner’s Guide prior to using your unit.

CT800 SERIES

QUESTIONS? We’re here to help. Call 1-877-646-5288 or visit ninjakitchen.com

Place lid onto pitcher,

then press down ﬁrmly,

making sure that both

side clips on lid fully

snap onto lip of pitcher.

MAX

HOT

Summary of content (2 pages)

PAGE 1
CT800 SERIES Please make sure to read the enclosed Ninja® Owner’s Guide prior to using your unit. HIGH-SPEED BLENDER QUICK ASSEMBLY PITCHER PARTS PITCHER PITCHER LID LID CAP TAMPER ASSEMBLY MAX 1. Lower pitcher onto motor base, then rotate clockwise until it clicks into place. MAX HOT 2. Add ingredients to pitcher, making sure not to exceed Max Fill line. Hot ingredients cannot exceed the Max Hot Liquid line. 3.
PAGE 2
CT800 SERIES Please make sure to read the enclosed Ninja® Owner’s Guide prior to using your unit. AUTO-iQ® AND MANUAL MODES AUTO-iQ MODE 10 unique timed programs customized to take the guesswork out of making great drinks and meals. MANUAL MODE Turn the dial from 1 to 10 for total control of blending speed. Press START/STOP to begin and end blending. SELECT AND RUN AN AUTO-IQ PROGRAM Turn dial to select the desired program, then press the START/STOP dial to begin.