CT800 Series INSTRUCTIONS ninjakitchen.com 1-877-646-5288 CT800_Series_IB_E_170718_MP.
THANK YOU for purchasing the Ninja Chef™ Blender REGISTER YOUR PURCHASE registeryourninja.com 1-877-646-5288 Scan QR code using mobile device TIP: You can find the model and serial numbers on the QR code label on the back of the motor base.
ENGLISH CONTENTS Important Safety Instructions ��������������������������������������������������������� 3 Getting to Know Your Ninja Chef™ Blender ��������������������������������� 7 Features ����������������������������������������������������������������������������������������������� 9 Before First Use ������������������������������������������������������������������������������10 Using Your 72 oz.
IMPORTANT SAFETY INSTRUCTIONS PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY WARNING To reduce the risk of injury, fire, electrical shock, or property damage, basic safety precautions must ALWAYS be followed, including the following numbered warnings and subsequent instructions. 1 Read all instructions prior to using the appliance and its accessories. 2 Carefully observe and practice all warnings and instructions.
ENGLISH 13 DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions, or has been dropped or damaged in any manner. This appliance has important information on the plug prong. The entire cord set is NOT suitable for replacement. If damaged, please contact SharkNinja LLC for service. 14 DO NOT use extension cords with this appliance. 15 DO NOT allow young children to operate this appliance or use as a toy.
IMPORTANT SAFETY INSTRUCTIONS PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY WARNING To reduce the risk of injury, fire, electrical shock, or property damage, basic safety precautions must ALWAYS be followed, including the following numbered warnings and subsequent instructions. 23 During operation and handling of the appliance, avoid contact with moving parts. 24 DO NOT operate the appliance with an empty pitcher or cup.
ENGLISH 35 If at any time the blender cup becomes warm to the touch, or steams or vents while blending, immediately stop blending ingredients and turn off the unit. 36 DO NOT perform grinding operations with the blender cups and Pro Extractor Blades® Assembly. 37 Remove the Pro Extractor Blades Assembly from the blender cup upon completion of blending. DO NOT store ingredients before or after blending them in the cup with the blade assembly attached.
GETTING TO KNOW YOUR NINJA CHEF™ BLENDER WELCOME! Congratulations on your purchase. Use this instruction manual to learn about the great features of your Ninja Chef blender. From assembly to use to maintenance, you will find it all in here. There are a variety of accessories that are compatible with this blender series. NOTE: The top flap of your box shows the select accessories that are included with your model. Visit ninjaaccessories.
ENGLISH A G B C H D E I J K F n i n j a k i tc h e n . c o m CT800_Series_IB_E_170718_MP.
FEATURES IMPORTANT: Review all warnings on pages 3–6 before proceeding. DID YOU KNOW? • All containers and lids are BPA free. • All blades, containers, and lids are dishwasher safe. MODES: CLEAN To run the self-cleaning program, first add warm water to the CLEAN line and a couple drops of dishwashing soap to the pitcher. Select CLEAN mode, then press START/STOP to begin. The unit will shut down when the cleaning cycle is complete. Once complete, thoroughly rinse and air-dry the pitcher.
1 ENGLISH BEFORE FIRST USE Remove all packaging materials from the unit. Exercise caution when handling the pitcher, as bottom blade assembly is sharp. 2 If included with your model, handle the Pro Extractor Blades® Assembly by grasping around the perimeter of the blade assembly base. 3 Wash containers, lids, blade assemblies, and tamper in warm, soapy water using a dishwashing utensil with a handle to avoid direct contact with the blades.
USING YOUR 72 OZ. PITCHER IMPORTANT: Review all warnings on pages 3–6 before proceeding. IMPORTANT: Hot ingredients are meant only for blending in the pitcher, NOT in the cup. TIP: To learn more about the unit’s programs, refer to page 9. TIP: Use the lid cap to easily add oil to emulsify dressings. Add desired measurement of oil to the cap, then pour into the pitcher through the hole in the lid. Replace cap when finished.
ENGLISH 3 Add ingredients to the pitcher, making sure not to exceed the MAX LIQUID line on the side of the pitcher. When blending any room temperature, cold, or freezing ingredients, such as beverages or smoothies, DO NOT exceed the MAX LIQUID line on the side of the pitcher. When blending hot ingredients, such as soups and sauces, NEVER exceed the MAX HOT LIQUID line or use the pulse setting.
USING YOUR 72 OZ. PITCHER - CONT. IMPORTANT: Review all warnings on pages 3–6 before proceeding. IMPORTANT: As a safety feature, if the pitcher is not properly installed, a flashing “JAR” message will appear on the control panel. If this happens, repeat step 2 on page 11. When the pitcher is properly installed, the power light will flash and the mode light will illuminate steadily, indicating the unit is ready for use.
ENGLISH 7 To remove the pitcher from the motor base, turn the pitcher counterclockwise and then lift it off the motor base. 8 To remove the lid, pull up one of the side tabs, then lift off the lid. The pitcher can then be emptied. If hot ingredients were blended, place the pitcher on a flat surface, carefully hold the pitcher handle, and remove the lid. Exercise caution when pouring ingredients to prevent possible burns. 9 When finished, unplug the unit and release the motor base from the work surface.
USING YOUR SINGLE-SERVE CUPS IMPORTANT: Review all warnings on pages 3–6 before proceeding. WARNING: DO NOT blend hot ingredients in the cup. Doing so may cause excessive pressure buildup, resulting in the risk of the user being burned. Hot blending is meant for the pitcher only. NOTE: The Single-Serve Cup may not be included with your blender model. Please view the top flap of the box to see which accessories are included with your unit. To purchase additional accessories, visit ninjaaccessories.com.
ENGLISH 3 Place Pro Extractor Blades® Assembly on top of cup and rotate clockwise until sealed tightly. 4 Turn the Single-Serve Cup upside down and install onto the motor base. Align the tabs on the cup with the slots on the base, then rotate cup clockwise until it clicks into place. n i n j a k i tc h e n . c o m CT800_Series_IB_E_170718_MP.
USING YOUR SINGLE-SERVE CUPS - CONT. IMPORTANT: Review all warnings on pages 3–6 before proceeding. IMPORTANT: As a safety feature, the timer will flash “JAR” and the motor will be disabled if the cup is not properly installed. If this happens, repeat step 4 on page 16. When the cup is properly installed, the power light will flash and the mode light will illuminate steadily, indicating the unit is ready for use. NOTE: Press the power button to turn the unit on.
ENGLISH 7 To remove the cup from the 8 Remove the Pro Extractor motor base, turn the cup Blades® Assembly by counterclockwise and then twisting it counterlift it off the motor base. clockwise. Exercise care when handling the blade assembly, as the blades are sharp. DO NOT store blended contents with the Pro Extractor Blades Assembly attached. 9 To enjoy your drink on the go, place the Spout Lid onto the Single-Serve Cup and twist clockwise until firmly sealed.
CARE & MAINTENANCE CLEANING 1 Separate all parts. 2 Hand-Washing Wash containers, blade assemblies, lids, and tamper in warm, soapy water, using a dishwashing utensil with a handle to avoid direct contact with the blades. Exercise care when washing Pro-Extractor Blades® Assembly and pitcher, as the blade assemblies are sharp. Thoroughly rinse and air-dry all parts. Dishwasher The tamper and all containers, lids, and blade assemblies are dishwasher safe.
ENGLISH TROUBLESHOOTING GUIDE WARNING: To reduce the risk of shock and unintended operation, turn off power and unplug unit before troubleshooting. Motor does not start or blade assembly does not rotate. • Make sure the pitcher or blender cup is securely placed on motor base. If “JAR” message appears on control panel, the pitcher or cup is not installed correctly. • The unit is turned off. Press the power button ( ) to turn on. • Check that the plug is securely inserted into the electrical outlet.
NOTES 21 1-877-646-5288 CT800_Series_IB_E_170718_MP.
ENGLISH ONE (1) YEAR LIMITED WARRANTY The 1-Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.
SharkNinja Operating LLC US: Needham, MA 02494 CAN: Ville St-Laurent, QC H4S 1A7 1-877-646-5288 ninjakitchen.com Illustrations may differ from actual product. We are constantly striving to improve our products; therefore the specifications contained herein are subject to change without notice. AUTO-IQ and PRO EXTRACTOR BLADES are registered trademarks of SharkNinja Operating LLC. NINJA CHEF is a trademark of SharkNinja Operating LLC. For SharkNinja U.S. Patent information, visit sharkninja.com/USPatents.