Use and Care Manual

26 27
ninjakitchen.com
ninjakitchen.com
FRANÇAIS
5 When preheating is complete, the unit will
beep and “ADD FOOD” will appear on the
display.
6 Open the hood and add ingredients to the
pot or set the bake pan directly in the pot,
and close the hood to start cooking. Once the
hood is closed, cooking will begin and the
timer will start counting down.
7 When cook time is complete, the unit will beep
and END will appear on the display.
Bake
1 Place cooking pot in the unit with the indent on
the pot aligned with the bump on the main unit.
Ensure the splatter shield is in place, then close
the hood.
2 Press the BAKE button. The default
temperature setting will display. Use the set of
arrows to the left of the display to adjust the
temperature up to 400°F.
3 Use the set of arrows to the right of the display
to adjust the cook time, in 1-minute increments,
up to 1 hour and in 5-minutes increments from 1
to 2 hours, or, if using the thermometer, refer to
Using the Foodi™ Smart Thermometer section.
4 Press START/STOP to begin preheating. The
progress bar will begin illuminating. It will take
approximately 3 minutes for the unit to preheat.
NOTE: While preheating is strongly
recommended for best results, you can skip
it by pressing the PREHEAT button. “ADD
FOOD” will appear on the display. Open the
hood and place ingredients in the crisper
basket. Once the hood is closed, cooking will
begin and the timer will start counting down.
NOTE: Convert traditional oven recipes by
reducing the temperature by 25°F. Check
food frequently to avoid overcooking.
NOTE: To use the thermometer to just
check your food’s internal doneness, press
MANUAL for 2 seconds and the food’s internal
temperature will appear on the screen. Press
and hold button again to exit mode.
Bake pan
not included
To turn on the unit, plug the power cord into a wall outlet, then press the button.
Broil (Not available on all models)
1 Place cooking pot in the unit with the indent
on the pot aligned with the bump on the main
unit. Place ingredients in the pot. Ensure the
splatter shield is in place, then close the hood.
2 Press the BROIL button. The default
temperature setting will display. Use the set of
arrows to the left of the display to adjust the
temperature up to 500°F.
3 Use the set of arrows to the right of the
display to adjust the cook time, in 1-minute
increments up to 30 minutes, or, if using the
thermometer, refer to the Using the Foodi™
Smart Thermometer section.
4 Press START/STOP to begin. (The unit does
not preheat in Broil mode.)
5 When cook time is complete, the unit will beep
and END will appear on the display.
Dehydrate (Not available on all models)
1 Place cooking pot in the unit with the indent
on the pot aligned with the bump on the main
unit. Place a single layer of ingredients in the
pot. Then place the crisper basket in the pot
on top of the ingredients and add another
layer of ingredients to the basket. Ensure the
splatter shield is in place, then close
the hood.
2 Press the DEHYDRATE button. The default
temperature setting will display. Use the set of
arrows to the left of the display to adjust the
temperature up
to 195°F.
3 Use the set of arrows to the right of the display
to adjust the dehydration time, in 15-minute
increments, up to 12 hours.
4 Press START/STOP to begin. (The unit does
not preheat in Dehydrate mode.)
5 When dehydration time is complete, the unit
will beep and END will appear on the display.
USING THE NINJA® FOODI® SMART XL GRILL – CONT.
NOTE: To check your food’s internal
doneness, press MANUAL for 2 seconds and
the food’s internal temperature will appear
on the screen. Press and hold button again
to exit mode.