User Manual

ENGLISH
9ninjakitchen. comninjakitchen.com
2 Add liquid then ingredients to the Power
Nutri Bowl. DO NOT add liquid past the
LIQUID FILL line or ingredients past the
MAX FILL line.
8
USING THE POWER NUTRI™ BOWL
3 Place the Hybrid Edge™ Blades Assembly
on the top of the bowl and turn clockwise
to seal.
5a If using an Auto-iQ® program, select
the program that best suits your
desired output. During the blending
process, twist the Power Paddle
counterclockwise continuously. The
preset feature will automatically stop
at the end of the program. To stop the
unit at any time, press the currently
active program again.
5b If using START/STOP, once the
ingredients have reached your desired
consistency, press START/STOP again,
and wait for the unit to come to a
complete stop. During the blending
process, make sure to twist the Power
Paddle counterclockwise continuously.
4 Turn the bowl upside down and install on
motor base by aligning the tabs on the
bowl with the slots on the base. Then,
rotate bowl clockwise until it clicks. Once
locked in place, the programs will illuminate
and the unit will be ready for use.
7 Remove the blade assembly by
twisting counterclockwise. DO NOT
store blended contents with the blade
assembly attached. Only use the Spout
Lid or Storage Lid to cover. Exercise care
when handling the blade assembly, as
the blades are sharp.
8 To enjoy on the go, place the Spout Lid
or Storage Lid onto the bowl and twist
lid clockwise until firmly sealed.
6 Remove the bowl from the motor base
by turning it counterclockwise and then
lifting up.
IMPORTANT: Review all warnings on
pages 4–5 before proceeding.
1 Plug in motor base and place on a clean,
dry, level surface such as a countertop
or table.
9 Unplug the unit when finished. Refer
to the Care & Maintenance section for
cleaning and storage instructions.
NOTE: While processing, twist the Power
Paddle counterclockwise continuously.