User Manual

ENGLISH
11ninjakitchen.comn injakitchen.com10
USING THE POWER NUTRI™ CUP
3 Place the Hybrid Edge™ Blades Assembly
on the top of the cup and turn clockwise
to seal.
5a If using an Auto-iQ® program, select
the program that best suits your
desired output. The preset feature will
automatically stop at the end of the
program. To stop the unit at any time,
press the currently active program again.
5b If using START/STOP, once the
ingredients have reached your desired
consistency, press START/STOP again,
and wait for the unit to come to a
complete stop.
4 Turn the cup upside down and install
on the motor base by aligning the tabs
on the cup with the slots on the base.
Then, rotate cup clockwise until it clicks.
Once locked in place, the programs will
illuminate and the unit will be ready for
use.
7 Remove the blade assembly by
twisting counterclockwise. DO NOT
store blended contents with the blade
assembly attached. Only use the Spout
Lid or Storage Lid to cover. Exercise care
when handling the blade assembly, as
the blades are sharp.
8 To enjoy on the go, place the Spout Lid
or Storage Lid onto the cup and twist lid
clockwise until firmly sealed.
9 Unplug the unit when finished. Refer
to the Care & Maintenance section for
cleaning and storage instructions.
6 Remove the cup from the motor base
by turning it counterclockwise and then
lifting up.
IMPORTANT: Review all warnings on
pages 4–5 before proceeding.
2 Add ingredients to the Power Nutri Cup.
DO NOT add ingredients past the
MAX LIQUID line.
1 Plug in motor base and place on a clean,
dry, level surface such as a countertop
or table.