Operation Manual

ManualsBrandsNintendo ManualsGame ConsoleNintendo Wii - RVK RVL-001- Channels and Settings

Wii Settings and Data Management

WEP

WPA(TKIP)

WPA(AES)

IP Address

Don't

Internet Setup Selections for Searching for an Access Point

Select the Connections Settings

option.

Select an open connection indicated

by “None”.

Select Wireless Connection.

Select Search for Access Point.

The Wii console will search for any identiﬁable wireless

Access Points nearby. Select your Access Point from the list.

Enter security information if applicable. See Troubleshooting

for Internet connections if problems occur, page 73.

Select OK.

Select OK to test the connection.

If the test succeeds,

you’ve completed

Internet Setup and

your Wii is wirelessly

connected. If the test

fails, consult the

Troubleshooting

section of the

manual.

Internet Setup Selections for Manually Connecting an Access Point

(Before trying to manually connect to your Access Point, try to search for it ﬁrst using the instructions on the previous page.)

To manually connect, ﬁrst select the

Connection Settings option. Select the

Console Information option if you need to

check the MAC address. This information

may be needed for manual setup.

Select an open connection indicated

by “None”.

Select Wireless Connection. Select Manual Setup.

These screens require you to input

settings from your PC or router to

establish a connection.

See support.nintendo.com for

additional help on how to complete

these screens.