MAA-RVK-S-USZ-C0 Wii Operations Manual System Setup
Cont ent s To protect your health and safety, and for correct use of the Wii system, please read and follow the instructions in this operations manual before setup or use. Throughout this manual, you will see this symbol followed by WARNING or CAUTION. These terms have different levels of meaning: WARNING - Warns you about incorrect use of the Wii system that could result in serious personal injury.
Hea l th a n d Safety In f o r m ati on WARNING - Seizures Some people (about 1 in 4000) may have seizures or blackouts triggered by light flashes or patterns, and this may occur while they are watching TV or playing video games, even if they have never had a seizure before. Anyone who has had a seizure, loss of awareness, or other symptom linked to an epileptic condition should consult a doctor before playing a video game. Parents should watch their children play video games.
Comp onent s Wii Console Wii Console Front view Back view Game Disc slot For inserting a Wii Game Disc. Slot lights blue and blinks when a disc is inserted. When WiiConnect24 is set to ON, the slot will blink when messages or data are received. Sensor Bar Connector Connects to the Sensor Bar. DC Input Connector Connects to the Wii AC Adapter. POWER Button Press to turn the console ON or OFF. NOTE: The Power LED does not go out when the power is turned off.
Comp onent s Wii Remote Plus Back view (Shown with the battery cover removed.) (Shown with the included Wii Remote Jacket attached.) Nunchuk Plug Wii Remote Wrist Strap B Button Sensor Bar Connects to the External Extension Connector on the Wii Remote Plus. Control Stick Pointer Lens Power Button Nunchuk Connector Hook Insert the cord of the wrist strap through the hook. See page 18 for information on wrist strap use.
Comp onent s Syst em S et up Wii AC Adapter Wii Console Usage Precautions Please read and follow the precautions listed below when setting up and using the Wii console. Failure to do so may result in damage to your Wii system or accessories. • Do not use any AC Adapter other than the one provided with your system. AC Plug Connects to the DC Input connector on the back of the Wii console.
Syste m S etu p Connecting the AV Cable Sensor Bar Setup Connecting the Sensor Bar TV Inputs 1. Insert the AV Multi Out plug on the Wii AV Cable into the AV Multi Out connector on the back of the console. VIDEO 2. Insert the RCA plugs on the Wii AV Cable into the input connectors on the TV, VCR or other audio equipment. AUDIO L AUDIO R Insert the Sensor Bar plug into the Sensor Bar connector on the back of the console.
Syste m S etu p 1. Remove the protective film from the foam pads on the bottom of the Sensor Bar. Mounting the Sensor Bar Below the Screen 2. Mount the Sensor Bar to the top of the TV. • The front of the Sensor Bar should be aligned close to the front of the TV. System Setup • The center of the Sensor Bar should be aligned with the center of the TV. 12 1. Remove the protective film from the foam pads on the bottom of the Sensor Bar.
Syste m S etu p TV and Audio/Video Settings Sensor Bar cable position After you have completed all steps of the setup procedure and are ready to use the Wii system, you will need to set the appropriate “input select” setting for your TV, VCR or other audio equipment. If desired, the Sensor Bar cable can be fed through a channel on the bottom of the Sensor Bar to orient the cable to the left or right. 1.
Syste m S etu p The Wii Remote™ Plus comes with the Wii Remote jacket installed. • Be sure that the Wii Remote jacket is installed during gameplay to reduce the risk of harm to the remote, surrounding objects, or people. • It may be necessary to remove the Wii Remote jacket – for example, to replace the batteries in the Wii Remote Plus. If you do remove the Wii Remote jacket, be sure to replace it before further play. Installing Batteries The Wii Remote Plus uses AA batteries.
Syste m S etu p Wii gameplay with the Wii Remote Plus can involve rapid or vigorous motion. Please use the wrist strap to prevent losing your grip on the remote and causing damage to the remote or surrounding objects, or injury to other people. Wearing the Wii Remote Wrist Strap 1. Open the lever on the strap lock and place your hand through the wrist strap. Hold the remote firmly in your hand. NOTE: Make sure you have placed batteries in the Wii Remote Plus.
Syste m S etu p Us ing Game Di scs NOTE: This mode temporarily removes the Standard Mode synchronization setup for all remotes until the power of the Wii console is turned off. When the power is turned back on again, the Standard Mode settings will return. MORE Battery Life LESS During the syncing process, the number of LEDs that blink will show the battery life of the remote that is being synchronized. 1. Press the HOME Button on a remote that is synchronized with the console. 2.
Wi i System Play Guideline s Us in g t h e W ii Remot e Plus Wii Remote Plus Configurations For best results when using the Wii system, follow these recommendations. Depending on the game, the way you hold and operate the remote will vary. You may need to hold the remote in either one or two hands. Read the instruction booklet for the game you are playing for information about what kind of gameplay control is required for that game.
U si ng the W ii Rem o te Plu s Us in g t h e N unch uk Basic Operations Point the remote at a specific place on the TV screen. Waving Wave the remote back and forth from side to side. CAUTION - Use the Wrist Strap Wii gameplay with the Wii Remote Plus and Nunchuk can involve rapid or vigorous motion. Please use the wrist strap to prevent losing your grip on the remote and causing damage to the remote and surrounding objects, or injury to other people. Be sure to install the Nunchuk as described.
U si ng the Nu n chu k Holding the Nunchuk and Wii Remote Plus Us in g S D Memor y Cards Disconnecting the Nunchuk Press the Lock/Release Levers on the sides of the Nunchuk plug and pull the plug straight out of the External Extension Connector on the bottom of the remote. SD Memory Cards SD cards are used in many digital cameras and cell phones and for data storage on PCs.
(Before seeking assistance, review the following problems and solutions.) No picture on TV screen • Make sure you have completed all steps, in the order that they appear, on the Quick Setup sheet included with your system. • Make sure that all components of your setup are plugged into power outlets and that all components are turned ON. • Make sure that cable connections are correctly installed and that all plugs are securely plugged into the appropriate connectors.
When playing a game that includes Wii MotionPlus features, the Wii Remote Plus operates erratically or unexpectedly. • The Wii Remote Plus may need to be recalibrated due to the following: 1. Changing batteries in the Wii Remote Plus during gameplay. 2. Moving Wii MotionPlus from a cold environment into a warm environment. To recalibrate the Wii Remote Plus, place it on a flat horizontal surface with the buttons facing down.
