Manual

10
4 ch Field Mixer FS-40X
Parts Names and Funcctions
Output panel （Right side）
SUB OUT Connectors （XLR 3-pin）
MAS LMT Master Limiter Limit Level Select Switch
Select the limitting level for output signal to the MAS OUT connector.
Set to the appropriate position of the level +3, +6, +9 or OFF according to the
equipment connected. When it is OFF, the limiter doesnt function.
2PIN:HOT
1PIN:GND
3PIN:COLD
Pinassignment XLR 3-pin, male
1PIN:GND
2PIN:HOT
3PIN:COLD
Pinassignment XLR 3-pin, female
for FS-40X A type : Male type connectors are installed .
for FS-40X B type : Female type connectors are installed.
Output the output signal selected by the SUB OUT level selct swith and regulated by
the MASTER volume controls. The MAS OUT output level select switch, -20 or -60dBm,
is provided for each channel.
When the OUT SELECT switch is set to the MIX position, the 3/L OUT connector
outputs the L channel signal and 4/R OUT connector outputs R channel signal and
when the DIRECT position, the 3/L OUT connector outputs the 3 channel signal and
the 4/R OUT connector outputs 4 channel signal
MAS OUT Connectors （XLR 3-pin）
2PIN:HOT
1PIN:GND
3PIN:COLD
Pinassignment XLR 3-pin, male
1PIN:GND
2PIN:HOT
3PIN:COLD
Pinassignment XLR 3-pin, female
for FS-40X A type : Male type connectors are installed .
for FS-40X B type : Female type connectors are installed.
Output the output signal selected by the MAS OUT level selct swith and regulated by
the MASTER volume controls. The MAS OUT output level select switch, +4, 0, -20 or
-60dBm, is provided for each channel.
When the OUT SELECT switch is set to the MIX position, the 1/L OUT connector
outputs the L channel signal and 2/R OUT connector outputs R channel signal and
when the DIRECT position, the 1/L OUT connector outputs the 1 channel signal and
the 2/R OUT connector outputs 2 channel signal