Manual

4 ch Field Mixer FS-40X

Use

Input Signal Setting

Before connecting the input signals, select and set the input select switches.

Select the input connector to which the input signal will be input according to the mixing channel

and the output connector.

■

Input Select Switch Setting and Input Signal Connection

LINE : When connecting the LINE level signal.

P48 : When connecting a phantom 48 V condenser microphone.

AB12 : When connecting a A-B 12 V type microphone.

(ex. SENNHEISER MKH416T, etc.)

D-MIC : When connecting a dynamic microphone

that does not need a power supply.

BATTERY CASE

Set the input select switch

Input connector

Input signal

XLR 3-pin female

2PIN:HOT

1PIN:GND

3PIN:COLD

1PIN:GND

2PIN:HOT

3PIN:COLD

XLR 3-pin male

1． Set the input select switch according to the input signal.

2． After setting the input select switches, connect the input signals to each of the input connectors

by the XLR 3-pin cable.

Input select switches

Input connectors （XLR 3-pin）

Input Connector Pinassignment

FS-40X A type

FS-40X B type