Manual

19
4 ch Field Mixer FS-40X
Use
Equalizer
LMT
PFL
main panel
(front)
EQ LED lights on to yellow.
to ON
fully up, to the +12dB,max.
search for the frequency
adjust to any level
1
250Hz 8KHz -12dB 12dB
ON
OFF
FRQ LEVEL
1
250Hz 8KHz -12dB 12dB
ON
OFF
FRQ LEVEL
Equalizer panel(Top)
1
250Hz 8KHz -12dB 12dB
ON
OFF
FRQ LEVEL
■Use the EQUALIZER
The EQUALIZER is used to raise or lower the level of any frequency range of the input sound.
The equalizing frequency can be adjusted in the range of 8kHz from 250Hz by the FRQ control
provided for each input channel.
And the level can be adjusted in the range of 12dB from -12dB by the LEVEL volume control
provided for each input channel.
1．Turn on the ON/OFF switch of a channel.
2．Turn the LEVEL volume control fully up, to the +12dB position.
Turn the FRQ control within 250Hz - 8kHz to search for the frequency that the sound that is
emphasized is heard best while confirming it by headphones.
3．Adjust the level to any level turning the LEVEL volume control after the frequency is decided.
4．When the EQUALIZER switch is turned on and off, an effect of the EQUALIZER is confirmed.
When the EQUALIZER is turned on, the EQ LED on the main panel turns on to yellow.
ON or OFF of the EQ can be identified on the front panel .
5．In the same procedure, adjust all necessary channels.
Then, the adjustments and settings of the audio has been completed.