Owner's Manual

MTC-38
INTAKE DOOR
INTAKE DOOR
PFP:27245
Trouble Diagnosis Procedure for Intake Door EJS001AU
SYMPTOM:
● Intake door does not change.
INSPECTION FLOW
Component Description EJS001AV
INTAKE DOOR MOTOR
The intake door motor is installed on the intake unit. Using a link, it
opens and closes the intake door.
When REC switch is ON, the ground line of the motor is switched
from terminal 2 to 1. This starts the motor because the position
switch contacts built into it make current flow. When REC switch is
OFF, the ground line is switched from terminal 1 to 2. The contacts
turn along with the motor. When they reach the non-current flow
position, the motor will stop.
LHA142
*1 MTC-39 *2 MTC-35 *3 MTC-34
LHA124