Owner's Manual

INTAKE DOOR
MTC-41
C
D
E
F
G
H
I
K
L
M
A
B
MTC
4. CHECK INTAKE DOOR LINKAGE
Refer to MTC-43, "
CONTROL LINKAGE ADJUSTMENT" .
OK or NG
OK >> INSPECTION END.
NG >> Repair or adjust.
Control Linkage Adjustment EJS001AX
INTAKE DOOR MOTOR
1. Install intake door motor on intake unit.
Ensure that the intake door motor lever is fitted into the slit por-
tion of intake door link.
2. Connect the intake door motor harness connector.
3. Turn ignition switch to “ON” position.
4. Check that intake door operates properly when REC switch is
turned ON and OFF.
LHA125