Owner's Manual

MTC-52
MAGNET CLUTCH
Magnet Clutch Circuit
EJS001B5
SYMPTOM:
● Magnet clutch does not engage when A/C switch and fan control switch are ON.
1. CHECK POWER SUPPLY FOR COMPRESSOR
Disconnect compressor harness connector.
Do approx. 12 volts exist between compressor harness connector E36 terminal 1, (L/R) and body ground?
Yes or No
Yes >> GO TO 2.
No >> GO TO 3.
2. CHECK MAGNET CLUTCH COIL
Disconnect magnet clutch connector.
Do approx. 3.2Ω exist between A/C compressor harness connector E36 terminal 1, (L/R) and body ground?
Yes or No
Yes >> INSPECTION END.
No >> Replace magnet clutch. Refer to MTC-69, "
COMPRESSOR CLUTCH" .
WHA256
WHA257