Owner's Manual

INTAKE SENSOR
MTC-67
C
D
E
F
G
H
I
K
L
M
A
B
MTC
2. CHECK INTAKE SENSOR CIRCUIT BETWEEN INTAKE SENSOR AND A/C CONTROL UNIT
Disconnect A/C control unit harness connector.
OK or NG
OK >> GO TO 3.
NG >> Repair harness or connector.
3. CHECK INTAKE SENSOR
Refer to MTC-66, "
Intake Sensor Circuit" .
OK or NG
OK >> Replace A/C control unit.
NG >> Replace intake sensor.
Removal and Installation EJS001GV
1. Remove the evaporator. Refer to MTC-80, "Removal" .
2. Remove the intake sensor clip and then the sensor.
CAUTION:
Be careful not to damage the core surface.
Terminals
Continuity
(+) (–)
Connector
Terminal No.
(Wire color)
Connector
Terminal No.
(Wire color)
Yes
M49 1 (GY) M32 12 (GY)
WJIA0265E
WJIA0100E