Owner's Manual
COMPRESSOR CLUTCH
MTC-73
C
D
E
F
G
H
I
K
L
M
A
B
MTC
● Install the clutch disc on the drive shaft, together with the original
shim(s). Press the clutch disc down using the drive plate
installer.
● Using the clutch disc tool to prevent clutch disc rotation, tighten
the bolt to 12 to 15 N·m (1.2 to 1.5 kg-m, 9 to 11 ft-lb) torque.
● After tightening the bolt, check that the pulley rotates
smoothly.
● Check clearance all the way around the clutch disc.
If the specified clearance is not obtained, replace adjusting
spacer and readjust.
WHA184
WHA229
Clutch disc-to-pulley
clearance
: 0.3 - 0.6 mm (0.012 - 0.024 in)
WHA194