Owner's Manual

COMPRESSOR CLUTCH
MTC-75
C
D
E
F
G
H
I
K
L
M
A
B
MTC
● Check clearance all the way around the clutch disc.
If the specified clearance is not obtained, replace adjusting
spacer and readjust.
Break-In Operation EJS001BI
When replacing compressor clutch assembly, always conduct the break-in operation. This is done by engag-
ing and disengaging the clutch about 30 times. Break-in operation raises the level of transmitted torque.
Clutch disc-to-pulley
clearance
: 0.3 - 0.6 mm (0.012 - 0.024 in)
AHA505A