Owner's Manual

MTC-78

HEATER & COOLING UNIT (HEATER CORE)

PFP:27110

Removal

EJS001BK

1. Drain the cooling system. Refer to MA-16, "DRAINING ENGINE COOLANT" (QG18DE), or MA-23,

"DRAINING ENGINE COOLANT" (QR25DE).

2. Discharge the A/C system. Refer to MTC-82, "

Discharging Refrigerant" .

3. Disconnect the two heater hoses from inside the engine compartment.

4. Remove the instrument panel assembly and steering member assembly. Refer to IP-10, "

INSTRUMENT

PANEL ASSEMBLY" .

5. Remove the heater unit.

6. Remove the heater core.

Installation

EJS001BL

Install in the reverse order of removal.

When filling radiator with coolant, refer to MA-16, "

DRAINING ENGINE COOLANT" (QG18DE), or MA-

23, "DRAINING ENGINE COOLANT" (QR25DE).

Recharge the A/C system. Refer to MTC-82, "

Evacuating System and Charging Refrigerant" .

LHA203