Owner's Manual

MT-10
[RS5F70A]
M/T OIL
M/T OIL
PFP:KLD20
Replacement ECS005TI
DRAINING
1. Start the engine and let it run to warm up the transaxle.
2. Stop the engine. Remove drain plug and drain oil.
3. Set a gasket on the drain plug and install it on the transaxle.
CAUTION:
Do not reuse gasket.
FILLING
1. Remove filler plug. Fill with new oil until oil level reaches the
specified limit near filler plug mounting hole as shown.
2. After refilling oil, check oil level as shown.
3. Install the filler plug in the transaxle case using a new gasket.
CAUTION:
Do not reuse gasket.
Checking ECS005TJ
OIL LEAKAGE AND OIL LEVEL
1. Check that oil is not leaking from transaxle.
2. Check oil level from filler plug mounting hole as shown.
CAUTION:
Never start the engine while checking the oil level.
3.
Install the filler plug in the transaxle case using a new gasket.
CAUTION:
Do not reuse gasket.
Drain plug : 10 - 19 N·m (1.0 - 2.0 kg-m, 87 - 173 in-lb)
SMA145AA
Oil grade : API GL-4, Viscosity SAE 75W-85
Capacity
(approximately)
: 3.0 (3 1/8 US qt, 2 5/8 Imp qt)
Filler plug : 10 - 19 N·m (1.0 - 2.0 kg-m, 87 - 173 in-lb)
SMA066C
Filler plug : 10 - 19 N·m (1.0 - 2.0 kg-m, 87 - 173 in-lb)
SMA066C