Owner's Manual

MT-104
[RS6F51H]
INPUT SHAFT AND GEARS
● Install with orientation of coupling sleeve as shown.
● Be sure not to hook the ends of the 2 spread springs (front
and back have two each) on the same shifting insert.
4. Install 3rd-4th coupling sleeve assembly using Tool as shown.
CAUTION:
Align the grooves of the shifting insert and the 3rd baulk
ring.
5. Install the 4th bushing using Tool as shown.
6. Install the 4th baulk ring.
7. Install the 4th input gear and 4th needle bearing.
SCIA0993E
SCIA1083E
SCIA1031E
SCIA1032E