Owner's Manual

INPUT SHAFT AND GEARS
MT-107
[RS6F51H]
D
E
F
G
H
I
J
K
L
M
A
B
MT
16. Install the input shaft rear bearing using Tool as shown.
CAUTION:
Install input shaft rear bearing with its brown surface facing
the input gear side.
17. Install the input shaft front bearing using Tool as shown.
18. Install the oil channel onto the input shaft.
19. Check the end play of the 3rd, 4th, 5th and 6th input gears as
shown.
SCIA1041E
SCIA1042E
End play standard value
3rd gear : 0.18 - 0.31 mm (0.0071 - 0.0122 in)
4th gear : 0.20 - 0.30 mm (0.0079 - 0.0118 in)
5th gear : 0.06 - 0.16 mm (0.0024 - 0.0063 in)
6th gear : 0.06 - 0.16 mm (0.0024 - 0.0063 in)
SCIA0966E