Owner's Manual

MT-112
[RS6F51H]
MAINSHAFT AND GEARS
ASSEMBLY
1. Install the reverse main gear using Tool as shown.
CAUTION:
Install with the orientation of reverse main gear as shown.
2. Install the 1st bushing using Tool as shown.
3. Install the needle bearing, and then the 1st main gear.
4. Install the spread spring, shifting insert, and a new 1st-2nd synchronizer hub onto the 1st-2nd coupling
sleeve.
CAUTION:
● Do not reuse 1st-2nd synchronizer hub
● Install with the orientation of the new synchronizer hub
as shown.
SCIA1048E
SCIA0992E
SCIA1049E
SCIA0921E