Owner's Manual

MAINSHAFT AND GEARS
MT-113
[RS6F51H]
D
E
F
G
H
I
J
K
L
M
A
B
MT
● Install with the orientation of coupling sleeve as shown.
● Do not hook the ends of the two spread springs (front
and back have two each) on the same shifting insert.
5. Install the 1st-2nd coupling sleeve assembly onto the mainshaft,
and the synchronizer hub assembly onto the mainshaft using
Tool as shown.
CAUTION:
● Outer baulk ring, synchronizer cone, and inner baulk ring
on the 2nd gear-side must have been removed.
● Install the coupling sleeve with the proper orientation.
6. Install the 2nd bushing using Tool as shown.
7. Install the outer baulk ring, synchronizer cone, and inner baulk
ring on 2nd gear-side.
8. Install the 2nd needle bearing and 2nd gear.
9. Install the 3rd main gear.
CAUTION:
Install the 3rd main gear with the orientation as shown.
10. Install the 3rd-4th mainshaft spacer.
SCIA0989E
SCIA1083E
SCIA1050E
SCIA1051E
SCIA1052E