Owner's Manual

MT-114
[RS6F51H]
MAINSHAFT AND GEARS
11. Measure the dimension “C1 ”. Select a suitable adjusting shim
so that the dimension “C
1 ” satisfies the specified standard
value, and install it onto the mainshaft.
CAUTION:
Only 1 adjusting shim can be selected.
Adjusting Shim
12. Install the 4th main gear with the specified orientation as shown,
using Tool as shown.
CAUTION:
Install the 4th main gear with the orientation as shown.
13. Install the 5th main gear with the specified orientation as shown,
using Tool as shown.
CAUTION:
Install the 5th main gear with the orientation as shown.
14. Install the 5th-6th mainshaft spacer.
Standard for
dimension “C
1 ”
: 173.85 - 173.95 mm (6.844 - 6.848 in)
SCIA0944E
Thickness Part number Thickness Part number
0.52 mm (0.0205 in)
0.60 mm (0.0236 in)
0.68 mm (0.0268 in)
0.76 mm (0.0299 in)
32238 8H500
32238 8H501
32238 8H502
32238 8H503
0.84 mm (0.0331 in)
0.92 mm (0.0362 in)
1.00 mm (0.0394 in)
1.08 mm (0.0425 in)
32238 8H504
32238 8H505
32238 8H506
32238 8H507
SCIA1053E
SCIA1054E