Owner's Manual

FINAL DRIVE
MT-119
[RS6F51H]
D
E
F
G
H
I
J
K
L
M
A
B
MT
FINAL DRIVE PFP:38411
Disassembly and Assembly ECS005VK
DISASSEMBLY
1. Remove the mounting bolts. Then, separate the final gear from the differential case.
2. Remove the speedometer drive gear.
3. Using a puller and Tool (drift), remove the differential side bear-
ing (clutch housing side) as shown.
4. Using a puller and Tool (drift), remove the differential side bear-
ing (transaxle case side) as shown.
INSPECTION AFTER DISASSEMBLY
Bearing
Check for bearing damage and rough rotation as shown. If neces-
sary, replace with a new one.
CAUTION:
When replacing the tapered roller bearing, replace the outer and
inner races as a set.
ASSEMBLY
1. Using Tool (drift), install the differential side bearing (transaxle
case side) as shown.
SCIA1019E
SCIA1060E
SPD715
SCIA1061E