Owner's Manual

SHIFT CONTROL
MT-121
[RS6F51H]
D
E
F
G
H
I
J
K
L
M
A
B
MT
SHIFT CONTROL PFP:32982
Inspection ECS005VL
Check the contact surfaces and sliding area for wear, damage, or
bending as shown. If necessary, replace the parts.
SHIFT FORK
Check if the width of the shift fork hook (sliding area with coupling
sleeve) is within specification, as shown.
Shift Fork
SCIA0913E
SMT801D
Item One-side wear specification Sliding width of new part
1st & 2nd 0.2 mm (0.008 in)
7.80 - 7.93 mm
(0.3071 - 0.3122 in)
3rd & 4th 0.2 mm (0.008 in)
7.80 - 7.93 mm
(0.3071 - 0.3122 in)
5th & 6th 0.2 mm (0.008 in)
6.10 - 6.23 mm
(0.2402 - 0.2453 in)
Reverse 0.2 mm (0.008 in)
12.80 - 12.93 mm
(0.5039 - 0.5091 in)