Owner's Manual

TRANSAXLE ASSEMBLY
MT-17
[RS5F70A]
D
E
F
G
H
I
J
K
L
M
A
B
MT
11. Remove LH side and rear side mounting bolts.
12. Remove the lower housing bolts.
13. Remove the bolts securing the transaxle to the engine.
14. Lower the transaxle while supporting it with the jack.
INSTALLATION
Installation is in the reverse order of removal.
● Tighten the starter motor bolts to specification.
● Tighten the LH and rear mounts to specification. Refer to MT-15, "Removal and Installation" .
● Tighten the transaxle to engine bolts to specification.
*: With gussets
WMT007
SMT658B
Starter motor bolts : 31 - 42 N·m (3.2 - 4.3 kg-m, 23 - 31 ft-lb)
Bolt No.
Tightening torque
N·m (kg-m, ft-lb)
" " mm (in)
1 30 - 40 (3.1 - 4.1, 22 - 30) 70 (2.76)
2 30 - 40 (3.1 - 4.1, 22 - 30) 80 (3.15)
3 30 - 40 (3.1 - 4.1, 22 - 30) 30 (1.18)
4* 16 - 21 (1.6 - 2.1, 12 - 15) 25 (0.98)
Front gusset A to engine 30 - 40 (3.1 - 4.1, 22 - 30) 20 (0.79)
Rear gusset B to engine 16 - 21 (1.6 - 2.1, 12 - 15) 16 (0.63)
SMT930D