Owner's Manual

MT-28
[RS5F70A]
TRANSAXLE ASSEMBLY
ASSEMBLY
Clutch Housing
1. Hammer the new striking rod oil seal into clutch housing as far
as it will go using Tool.
CAUTION:
Do not reuse striking rod oil seal.
2. Hammer the differential oil seal into clutch housing with a suit-
able tool until it becomes flush with clutch housing end face.
CAUTION:
Do not reuse differential oil seal.
3. Hammer input shaft oil seal into clutch housing as far as it will go
with a suitable tool.
CAUTION:
Do not reuse input shaft oil seal.
4. Hammer the dust seal into clutch housing as far as it will go
using Tool.
CAUTION:
Do not reuse dust seal.
SMT722DA
SMT723DA
SMT724DA
SMT725DA