Owner's Manual

TRANSAXLE ASSEMBLY
MT-29
[RS5F70A]
D
E
F
G
H
I
J
K
L
M
A
B
MT
5. Install outer race of differential side bearing using Tool.
6. Install new oil channel (mainshaft).
CAUTION:
Pay attention to installation direction of oil channel.
7. Align the notches on mainshaft front bearing and transaxle case.
Then, install mainshaft front bearing with a suitable tool.
8. Install mainshaft bearing retainer, tighten bolt to specification.
9. Attach boot, striking rod, and striking lever to clutch housing.
Install new retaining pin for striking lever using Tool.
CAUTION:
● Before installing striking rod, wrap the end with a vinyl
tape or similar product to prevent oil seal from being
damaged.
● Do not reuse retaining pin.
SMT726DA
SMT727D
SMT728DA
SMT729D
SMT667DA