Owner's Manual

MT-32
[RS5F70A]
TRANSAXLE ASSEMBLY
26. Install 3rd & 4th shift fork, bracket, and fork rod.
27. Install 3rd & 4th bracket retaining pin using Tool.
CAUTION:
Do not reuse retaining pin.
28. Install 3rd & 4th shift fork stopper ring.
CAUTION:
Do not reuse stopper ring.
29. Install check ball, check pin, and check spring, and apply Anaer-
obic Liquid Gasket or equivalent onto the check plug. Then,
tighten the check plug to specification.
Refer to MT-20, "
SHIFT CONTROL COMPONENTS" .
Transaxle Case
1. Insert differential oil seal into differential case with a suitable tool
until it becomes flush with case end face.
2. Install welch plug into transaxle case with a suitable tool.
SMT656DB
SMT655D
SMT737DA
SMT739D