Owner's Manual

TRANSAXLE ASSEMBLY
MT-35
[RS5F70A]
D
E
F
G
H
I
J
K
L
M
A
B
MT
8. Install oil gutter into transaxle case.
9. Clean mating surfaces of clutch housing and transaxle case.
Check for cracks and damage, then apply sealant. Use Genuine
Anaerobic Liquid Gasket or equivalent. Refer to GI-45, "
Recom-
mended Chemical Products and Sealants" .
10. Install transaxle case onto clutch housing, and tighten mounting
bolts with specified torque.
11. Apply sealant to threads of back-up lamp switch, PNP switch,
and drain plug, then install them. Use Genuine Anaerobic Liquid
Gasket or equivalent. Refer to GI-45, "
Recommended Chemical
Products and Sealants" .
NOTE:
Fill the case with oil before installation of the filler plug.
12. Install speedometer pinion assembly.
CAUTION:
Do not reuse O-ring.
SMT650D
SMT802D
Transaxle case mounting
bolts
: Refer to MT-18, "CASE
COMPONENTS" .
SMT649D
WMT023