Owner's Manual

MT-38
[RS5F70A]
INPUT SHAFT AND GEARS
INPUT SHAFT AND GEARS
PFP:32200
Disassembly ECS005TQ
1. Before disassembly, measure the end plays of 3rd and 4th input
gears with a suitable tool. Refer to MT-61, "
Gear End Play" .
● If end play is not within specification, disassemble and check
the parts.
2. Remove oil channel from input shaft rear bearing.
3. Press out input shaft rear bearing using Tool.
4. Remove C-ring holder.
5. Remove 5th gear rear C-ring.
SMT759D
SMT671D
SMT672DA
SMT673D