Owner's Manual

INPUT SHAFT AND GEARS
MT-39
[RS5F70A]
D
E
F
G
H
I
J
K
L
M
A
B
MT
6. Remove 5th input gear from input shaft using Tool.
7. Remove 5th gear front C-ring.
8. Remove 4th input gear, baulk ring, 4th gear needle bearing, and
4th gear C-ring from input shaft.
9. Press out both 3rd & 4th synchronizer hub assembly and 3rd
input gear from input shaft using Tool.
10. Remove 3rd gear needle bearing.
11. Press out input shaft front bearing from input shaft using Tool.
Inspection ECS005TR
GEAR AND SHAFT
● Check shaft for cracks, wear or bending.
● Check gears for excessive wear, chips or cracks.
SMT674DA
SMT675DA
SMT676DA
SMT693D