Owner's Manual

MT-46
[RS5F70A]
MAINSHAFT AND GEARS
5. Remove mainshaft thrust washer.
6. Remove snap ring from mainshaft. Then, remove reverse main gear assembly, reverse gear needle bear-
ing, and reverse gear baulk ring.
7. Place bearing replacer between 5th & reverse synchronizer hub
and 5th main gear, and press out both reverse gear bushing and
5th & reverse synchronizer assembly using Tool.
8. Remove 5th main gear, 5th gear baulk ring, and 5th gear needle bearing.
9. Place bearing replacer between 3rd and 4th main gears, and
press out both 5th gear bushing and 4th main gear using Tool.
10. Remove mainshaft adjusting shim and spacer.
11. Place bearing replacer between 2nd main gear and 1st & 2nd synchronizer hub, and press out both 3rd
and 2nd main gears.
12. Remove 2nd double cone assembly, 2nd gear bushing, and coupling sleeve assembly.
SMT680D
WMT024
WMT025
SMT683D