Owner's Manual

PREPARATION
MT-5
[RS5F70A]
D
E
F
G
H
I
J
K
L
M
A
B
MT
ST33061000
(J8107-2)
Drift
Removing differential side bearing
a: 39 mm (1.54 in) dia.
b: 29.5 mm (1.16 in) dia.
ST33290001
(J34286)
Puller
● Removing idler gear bearing outer race
a: 250 mm (9.84 in)
b: 160 mm (6.30 in)
ST33230000
(J25805-01)
Drift
Removing differential oil seal
Installing differential side bearing
a: 51 mm (2.01 in) dia.
b: 28.5 mm (1.122 in) dia.
ST30720000
(J25405)
Drift
Installing differential side bearing outer race
a: 77 mm (3.03 in) dia.
b: 55.5 mm (2.185 in) dia.
ST22350000
(J25678-01)
Drift
Installing input shaft front and rear bearing
a: 34 mm (1.34 in) dia.
b: 28 mm (1.10 in) dia.
ST22452000
(J34335)
Drift
Installing 3rd and 4th main gear
Installing 5th gear bush
Installing 5th & Rev synchronizer hub
Installing Rev gear bush
Installing mainshaft rear bearing
a: 45 mm (1.77 in) dia.
b: 36 mm (1.42 in) dia.
ST37750000
(J34335)
Drift
Installing input shaft oil seal
Installing 5th synchronizer
Installing mainshaft rear bearing
Installing 5th main gear
Installing 3rd & 4th synchronizer hub
Installing striking rod oil seal
Installing clutch housing dust seal
a: 40 mm (1.57 in) dia.
b: 31 mm (1.22 in) dia.
Tool number
(Kent-Moore No.)
Tool name
Description
NT073
NT414
NT084
NT115
NT065
NT065
NT065