Owner's Manual

MT-50
[RS5F70A]
MAINSHAFT AND GEARS
6. Install 1st & 2nd coupling sleeve with its chamfered surface fac-
ing the 1st main gear side onto 1st & 2nd synchronizer hub.
7. Install 2nd gear bushing with its flange surface facing 1st & 2nd
synchronizer hub side using Tool.
8. Install 2nd needle bearing, 2nd double cone assembly, and 2nd
main gear onto mainshaft using Tool.
9. Position 3rd main gear as shown, and install it using Tool.
CAUTION:
Do not reuse 3rd main gear.
10. Install spacer and mainshaft adjusting shim onto mainshaft.
11. Select a mainshaft adjusting shim suitable to satisfy the follow-
ing specification of dimension “L” and install it onto mainshaft.
SMT708D
WMT027
SMT710DA
Dimension “L” : 151.35 - 151.45 mm
(5.9586 - 5.9626 in)
Mainshaft adjusting
shims
: Refer to MT-62, "
Available
Adjusting Shims" .
SMT711D