Owner's Manual

MT-52
[RS5F70A]
MAINSHAFT AND GEARS
● Pay attention to the shape of spread spring and shifting insert
for correct assembly.
Do not install spread spring hook onto the same shifting
insert.
● Install synchronizer hub with its three grooves facing the front
side (5th main gear side).
CAUTION:
Do not reuse 5th & reverse synchronizer hub.
● Install 5th & reverse coupling sleeve with its chamfered sur-
face facing the reverse main gear side.
17. Install 5th & reverse synchronizer hub assembly using Tool.
18. Install reverse gear baulk ring using Tool.
19. Install reverse gear bushing using Tool.
20. Install reverse gear needle bearing using Tool.
21. Install sub-gear, sub-gear washer, and snap ring onto reverse
main gear.
CAUTION:
● Pay attention to direction of sub-gear washer.
● Do not reuse snap ring.
SMT695D
SMT716D
SMT715DA
WMT029
SMT718D