Owner's Manual

MAINSHAFT AND GEARS
MT-53
[RS5F70A]
D
E
F
G
H
I
J
K
L
M
A
B
MT
22. Install reverse main gear assembly onto mainshaft.
23. Select a thrust washer suitable to satisfy the following specifica-
tion of dimension “M” as shown, and install it onto mainshaft.
24. Install mainshaft rear bearing using Tool.
25. Install mainshaft C-ring.
26. Using feeler gauge, measure the end play of mainshaft rear
bearing with a suitable tool, and check if it satisfies the following
specification.
27. Install C-ring holder.
Dimension “M” : 244.20 - 244.30 mm
(9.6142 - 9.6181 in)
Available thrust
washers
: Refer to MT-64, "
Avail-
able Thrust Washer" .
SMT719D
SMT720DA
End play : 0 - 0.06 mm (0 - 0.0024 in)
Mainshaft C-rings : Refer to MT-61, "
Available C-
rings" .
SMT721D
SMT678D