Owner's Manual

SHIFT CONTROL
MT-59
[RS5F70A]
D
E
F
G
H
I
J
K
L
M
A
B
MT
SHIFT CONTROL PFP:32982
Inspection ECS005U0
● Check if the width of shift fork hook (sliding area with coupling
sleeve) is within allowable specification below.
● Check if shift check groove of fork rod or 5th & reverse check
groove is worn, or has any other abnormalities.
Item One-side wear Sliding width of new part
1st & 2nd 0.2 mm (0.008 in)
7.80 - 7.93 mm
(0.3071 - 0.3122 in)
3rd & 4th 0.2 mm (0.008 in)
7.80 - 7.93 mm
(0.3071 - 0.3122 in)
5th & reverse 0.2 mm (0.008 in)
7.80 - 7.93 mm
(0.3071 - 0.3122 in)
SMT801D
SMT692D