Owner's Manual

PREPARATION
MT-67
[RS6F51H]
D
E
F
G
H
I
J
K
L
M
A
B
MT
PREPARATION PFP:00002
Special Service Tools ECS005V3
The actual shapes of the Kent-Moore tools may differ from those of the special tools illustrated here.
Tool number
(Kent-Moore No.)
Tool name
Description
KV381054S0
(J34286)
Puller
Side bearing outer race removal
Mainshaft front bearing removal
ST35321000
( — )
Drift
Input shaft oil seal installation
Reverse main gear installation
1st bushing installation
1st-2nd synchronizer hub installation
2nd bushing installation
3rd main gear installation
a: 49 mm (1.93 in) dia.
b: 41 mm (1.61 in) dia.
ST30720000
(J25405)
Drift
Differential oil seal installation
Differential side bearing outer race installation
Mainshaft rear bearing installation
Differential side bearing installation
a: 77 mm (3.03 in) dia.
b: 55.5 mm (2.185 in) dia.
ST33200000
(J26082)
Drift
Mainshaft front bearing installation
6th bushing installation
4th main gear installation
5th main gear installation
6th main gear installation
a: 60 mm (2.36 in) dia.
b: 44.5 mm (1.752 in) dia.
ST33061000
(J8107-2)
Drift
Bore plug installation
Differential side bearing removal
a: 38 mm (1.50 in) dia.
b: 28.5 mm (1.122 in) dia.
ST33052000
( — )
Drift
Welch plug installation
Input shaft rear bearing removal
5th bushing, thrust washer, 4th input gear, 4th
gear bushing, 3rd-4th synchronizer hub and
3rd input gear removal
Input shaft front bearing installation
6th input gear and 6th bushing removal
Mainshaft rear bearing removal
4th main gear and 5th main gear removal
6th main gear removal
a: 22 mm (0.87 in) dia.
b: 28 mm (1.10 in) dia.
ZZA0601D
ZZA1000D
ZZA0811D
ZZA1002D
ZZA1000D
ZZA1023D