Owner's Manual

MT-68
[RS6F51H]
PREPARATION
KV40105020
( — )
Drift
5th input gear and synchronizer hub removal
3rd main gear, 2nd main gear, 2nd bushing,
1st-2nd synchronizer hub, 1st main gear, re-
verse main gear and 1st bushing removal
a: 39.7 mm (1.563 in) dia.
b: 35 mm (1.38 in) dia.
c: 15 mm (0.59 in)
KV40105710
( — )
Press stand
3rd-4th synchronizer hub installation
4th bushing installation
5th bushing installation
5th-6th synchronizer hub installation
2nd bushing installation
3rd main gear installation
a: 46 mm (1.81 in) dia.
b: 41 mm (1.61 in)
ST38220000
( — )
Press stand
Reverse main gear installation
1st bushing installation
1st-2nd synchronizer hub installation
a: 63 mm (2.48 in) dia.
b: 65 mm (2.56 in)
ST30032000
(J26010-01)
Drift
Input shaft front bearing installation
a: 80 mm (3.15 in) dia.
b: 38 mm (1.50 in) dia.
c: 31 mm (1.22 in) dia.
ST30901000
(J26010-01)
Drift
Input shaft rear bearing installation
4th main gear installation
5th main gear installation
6th main gear installation
Mainshaft rear bearing installation
a: 79 mm (3.11 in) dia.
b: 45 mm (1.77 in) dia.
c: 35.2 mm (1.386 in) dia.
ST30031000
(J22912-01)
Puller
Measuring wear of 1st and 2nd baulk ring
Tool number
(Kent-Moore No.)
Tool name
Description
ZZA1133D
ZZA1058D
ZZA1058D
ZZA0978D
ZZA0978D
ZZA0537D