Owner's Manual

M/T OIL
MT-73
[RS6F51H]
D
E
F
G
H
I
J
K
L
M
A
B
MT
M/T OIL PFP:KLD20
Replacement ECS005V7
DRAINING
1. Start the engine and let it run to warm up the transaxle oil.
2. Stop the engine. Remove drain plug and drain oil.
3. Set a new gasket on the drain plug and install it in transaxle
body.
CAUTION:
Do not reuse gasket.
FILLING
1. Remove filler plug. Fill with new oil until oil level reaches the
specified limit near filler plug mounting hole.
2. After refilling oil, check oil level. Assemble a new gasket on to
filler plug, then install it in transaxle body.
CAUTION:
Do not reuse gasket.
Checking ECS005V8
OIL LEAKAGE AND OIL LEVEL
● Check that oil is not leaking from transaxle.
● Check oil level from filler plug mounting hole as shown.
CAUTION:
Never start engine while checking oil level.
● Set a new gasket on the filler plug and install it in transaxle body.
CAUTION:
Do not reuse gasket.
Drain plug : 30 - 39 N·m (3.1 - 4.0 kg-m, 23 - 28 ft-lb)
WCIA0022E
Oil grade : API GL-4, Viscosity SAE 75W-85
Capacity
(approximately)
: 2.2 (2 3/8 US qt, 2 Imp qt)
Filler plug : 30 - 39 N·m (3.1 - 4.0 kg-m, 23 - 28 ft-lb)
WCIA0022E
Filler plug : 30 - 39 N·m (3.1 - 4.0 kg-m, 23 - 28 ft-lb)
WCIA0022E