Owner's Manual

MT-74
[RS6F51H]
SIDE OIL SEAL
SIDE OIL SEAL
PFP:32113
Removal and Installation ECS005V9
REMOVAL
1. Remove the drive shaft from the transaxle body. Refer to FAX-14, "Removal" .
2. Remove oil seal with a slotted screwdriver.
CAUTION:
Be careful not to damage the case surface when removing
the oil seal.
INSTALLATION
Installation is in the reverse order of removal.
● Using Tool (drift), drive the new oil seal straight until it protrudes
from the case end equal to dimension "A" as shown.
CAUTION:
● Before installing oil seal, apply multi-purpose grease to
oil seal lips.
● Oil seal is not reusable.
● Check oil level after installation. Refer to MT-73, "Checking" .
WCIA0023E
Dimension "A" : Within 0.5 mm (0.02 in) or flush with
the case.
Tool (drift) : ST30720000 (J25405)
SCIA1010E