Owner's Manual
MT-80
[RS6F51H]
TRANSAXLE ASSEMBLY
15. Remove the bolts that mount the engine to the transaxle.
16. Remove the transaxle from the vehicle as shown.
INSTALLATION
Installation is the reverse order of removal.
● When installing the transaxle to the engine, use them specified tightening torque in the numerical
sequence as shown.
CAUTION:
When installing the transaxle, do not allow the transaxle input shaft to make contact with the
clutch cover.
● After installation, check the transaxle oil level. Refer to MT-73,
"Checking" .
● After installation, check for any leaks and any loose mecha-
nisms.
MTD0062D
Bolt No. 1 2 3 4 5 6 7 8 9 10
“” mm (in)
40 82 47 47 52 40 40 40 30 30
Tightening
torque
N·m (kg-m,
ft-lb)
30 - 40
(3.1 - 4.1,
22 - 29)
70 - 80 (7.1 - 8.1, 52 - 59) 30 - 40 (3.1 - 4.1, 22 - 29)
LCIA0036E