Owner's Manual

TRANSAXLE ASSEMBLY
MT-89
[RS6F51H]
D
E
F
G
H
I
J
K
L
M
A
B
MT
35. Remove the differential oil seal (clutch housing side) using Tool
as shown.
36. Remove the differential side bearing outer race (clutch housing
side) using Tool as shown.
37. Remove the input shaft oil seal using a suitable tool as shown.
CAUTION:
Do not damage the clutch housing sealing surface.
ASSEMBLY
1. Install a new input shaft oil seal from the clutch housing end of
the side, to the depth of 1.8 - 2.8 mm (0.071 - 0.110 in) using
Tool (drift) as shown.
CAUTION:
Oil seals are not reusable.
SMT117E
SMT116E
SCIA0398E
SCIA1022E