Owner's Manual

MT-90
[RS6F51H]
TRANSAXLE ASSEMBLY
2. Install a new differential oil seal using Tool (drift) as shown.
CAUTION:
Oil seals are not reusable.
3. Install the oil channel on the mainshaft side as shown.
CAUTION:
Position the oil channel with the orientation as shown, for
installation.
4. Install the mainshaft front bearing using Tool (drift) as shown.
CAUTION:
Position the mainshaft front bearing with the orientation as
shown, for installation
5. Install the mainshaft front bearing retainer.
CAUTION:
Install the bearing retainer with the punched surface facing
up.
6. Install the differential side bearing outer race using Tool as
shown.
SCIA1023E
SCIA0986E
SCIA1024E
Bearing retainer bolt : 6.27 - 8.33 N·m (0.64 -
0.84 kg-m, 56 - 73 in-lb)
SCIA0400E
SCIA1063E