Owner's Manual

TRANSAXLE ASSEMBLY
MT-91
[RS6F51H]
D
E
F
G
H
I
J
K
L
M
A
B
MT
7. Install the final drive assembly into the clutch housing.
8. Install the input shaft assembly, mainshaft assembly, and
reverse idler gear assembly into the clutch housing.
CAUTION:
Do not damage the input shaft oil seal.
9. Install the 1st-2nd fork rod bracket onto the 1st-2nd fork rod, and
then install a new retaining pin as shown.
CAUTION:
Retaining pins are not reusable.
10. Install the 1st-2nd fork rod and the 1st-2nd shift fork, and then
install a new retaining pin.
CAUTION:
Retaining pins are not reusable.
11. Install the shift check sleeve.
12. Install the 3rd-4th bracket, 3rd-4th shift fork, and 3rd-4th fork rod with the interlock pin.
SCIA0888E
SCIA0964E
SCIA0889E
SCIA0394E