Owner's Manual

TRANSAXLE ASSEMBLY
MT-95
[RS6F51H]
D
E
F
G
H
I
J
K
L
M
A
B
MT
30. Install a new bore plug using Tool (drift) as shown.
CAUTION:
Bore plugs are not reusable.
31. Install the new welch plug using Tool (drift).
CAUTION:
Do not reuse the welch plug
32. Install the 2 check balls, 2 check springs, and 2 new check ball
plugs.
CAUTION:
Check ball plugs are not reusable.
33. Apply sealant to the threads of the neutral switch and reverse
lamp switch. Then install them into the transaxle case. Refer to
MT-81, "
CASE AND HOUSING COMPONENTS" . Use Genuine
Anaerobic Liquid Gasket or equivalent. Refer to GI-45, "
Recom-
mended Chemical Products and Sealants" .
34. Install new gaskets onto the drain plug and filler plug, and then install them into the transaxle case.
CAUTION:
● Gaskets are not reusable.
● After oil is filled, tighten filler plug to specification. Refer to MT-81, "CASE AND HOUSING COM-
PONENTS" .
SCIA1025E
SMT131E
LCIA0302E
SCIA0895E