Owner's Manual

PREPARATION
MTC-13
C
D
E
F
G
H
I
K
L
M
A
B
MTC
Revision: March 2005 2005 Altima
PREPARATION PFP:00002
Special Service Tools EJS003GJ
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
HFC-134a (R-134a) Service Tools and Equipment EJS003GK
Never mix HFC-134a refrigerant and/or its specified lubricant with CFC-12 (R-12) refrigerant and/or its lubri-
cant.
Separate and non-interchangeable service equipment must be used for handling each type of refrigerant/lubri-
cant.
Refrigerant container fittings, service hose fittings and service equipment fittings (equipment which handles
refrigerant and/or lubricant) are different between CFC-12 (R-12) and HFC-134a (R-134a). This is to avoid
mixed use of the refrigerants/lubricant.
Adapters that convert one size fitting to another must never be used: refrigerant/lubricant contamination will
occur and compressor failure will result.
Tool number
(Kent-Moore No.)
Tool name
Description
—
(J-38873-A)
Drive plate installer
Installing pulley and drive plate
KV99233130
(J-29884)
Pulley puller
Removing pulley
WJIA0367E
LHA172
Tool number
(Kent-Moore No.)
Tool name
Description
—
(—)
Refrigerant HFC-134a (R-134a)
Container color: Light blue
Container marking: HFC-134a (R-
134a)
Fitting size: Thread size
● large container 1/2 in -16 ACME
KLH00-PAGS0
(—)
Genuine NISSAN A/C System Lu-
bricant Type DH-PS
Type: Poly alkaline glycol oil (PAG),
type DH-PS
Application: HFC-134a (R-134a) vane
rotary compressors (NISSAN only)
Lubricity: 40 m (1.4 US fl oz, 1.4 Imp
fl oz)
K991J0130
(ACR2005-NI)
ACR A/C Service Center
Refrigerant recovery, recycling and re-
charging
S-NT196
S-NT197
WJIA0293E